FOOD SAFE INFORMATION

FDA status information of Greencoat water based coatings complies with Food and Drug Administration Regulation 21 CFR 177 subject to the limitations and requirements therein. This Regulation describes polymers that may be used in contact with food, subject to the finished food contact article meeting the extractive limitations under the intended conditions of use, as shown in paragraph (d) of the Regulation.

FDA status  information of Greencoat water based coatings complies with Food and Drug Administration Regulation 21 CFR 177 subject to the limitations and requirements therein. 

This Regulation describes polymers that may be used in contact with food, subject to the finished food contact article meeting the extractive limitations under the intended conditions of use, as shown in paragraph (d) of the Regulation.

The information and certification provided herein are based on data we believe to be reliable, to the best of our knowledge. 

The information and certification apply only to the specific material designated herein as sold by Greencoat and do not apply to use in any process or in combination with any other material. 

They are provided at the request  of and without charge to our customers. 

Accordingly, Greencoat cannot guarantee or warrant such certifications or information and assumes no liability for their use. 

 Additional information: The products themselves have not been tested, but their classifications calculated according to conventional methods (from the dangerous substances regulations) 

The products have been used in the painting of aquariums housing topical fish as well as ponds housing Koi fish with no effects at all.  

The product has no noxious fumes or odour emission during and after application 

Ecological Information:

Aquatic toxicity:  No known effects 

Biodegradability:   Products are considered highly biodegradable, but not tested. 

Bio-accumulation: No known effects

Mobility: Not tested

Additional information:                

The product is environmentally friendly with a Zero to very low VOC (Volatile Organic Compound) , determined by the choice of colour introduced.

ROOF AND POND SEALER

Roof & Pond Sealer is a water-based, fire retardant, waterproofing and an elastomeric sealant. This product is ready for application and is used to line electric cables and water pipes. It is also used to fill and seal cracks and joints in both metal and concrete surfaces, which ultimately prevents water penetration.

When the product is cured, it forms a tough, highly durable, flexible seal that has ultimate protection properties and can tolerate thermal, shrinkage movements. A satin finish is available in white, standard colours and tintable pastel base colours. The standard colours that are available are Charcoal, Medium Grey, Light Grey, Modern Red, Modern Brown, Terracotta, Black, Green, and White.

Principal characteristics:

  • The product has fast drying, excellent water resistance properties and excellent movement tolerance.
  • Cures to form an elastic seal and is excellent for sealing cracks and joints.
  • Stain, impact, and fire resistant.

Intended use:

GREENCOAT Roof & Pond Sealer has sealing and adhesive properties. The product can be applied over concrete, metal, wood etc. The ideal area for application is ponds, metal roofs, parapets, dam, gutters, down pipes, concrete roofs, pre-cast panel walls, glazing etc.

Cleaning:

Clean all tools (brushes and rollers) while wet with water after use.

Download Brochure

GREENCOAT ROOF & POND SEALER TDS & MSDS.pdf

Contact us today for more info

PROTECTING YOUR THATCH ROOF

GREENCOAT Thatchguard is a water-based, acrylic membrane that is formulated to provide superb sealing and fire-retardant qualities for thatch roofs. The product is environmentally friendly. This product also enhances dust suppression. It will also protect your thatch roofs against birds and animals pulling the grass out as well as keeping insects out. Satin finish available in clear and golden yellow.

Principal characteristics

  • Fire retardant properties
  • Ultra Violet resistance
  • Stain resistance
  • The product has good adhesion properties and does not turn yellowish over time.
  • The product is non – toxic and odour free.

Intended use

The product is used to delay the thatch rotting process thus lengthening the roof’s life span. GREENCOAT Thatchguard keeps the thatch sturdy and prevents birds from pulling the thatch out. When the product is sprayed on the inside of a thatch roof the product prevents dust rains inside the house. GREENCOAT Thatchguard will waterproof and reduce the weight of the roof. The product also eliminates the frequent brushing and re – thatching of thatch roofs.

For more info Contact Us Today!

HOW TO DO A WATERPROOFING APPLICATION ON AN ASBESTOS ROOF

GREENCOAT RoofRubber is a modified flexible acrylic emulsion with a slight sheen for waterproofing of roofs, parapets and wall surfaces.

Step 1:

Wash the roof with Greencoat Prep and brush off the Asbestos residue.

Step 2:

Wash the roof with Greencoat Greenwash to neutralise the roof.

Step 3:

Get an Asbestos contractor that is registered with the Government Chief inspectors to remove the asbestos residue.

Step 4:

Prime the roof with Greencoat Bind.

Step 5:

Apply two coats of Greencoat Roofrubber.

For more info Contact Us Today!