CategoriesSpecialized Coatings by

FOOD SAFE INFORMATION

FDA status information of Greencoat water based coatings complies with Food and Drug Administration Regulation 21 CFR 177 subject to the limitations and requirements therein. This Regulation describes polymers that may be used in contact with food, subject to the finished food contact article meeting the extractive limitations under the intended conditions of use, as shown in paragraph (d) of the Regulation.

FDA status  information of Greencoat water based coatings complies with Food and Drug Administration Regulation 21 CFR 177 subject to the limitations and requirements therein. 

This Regulation describes polymers that may be used in contact with food, subject to the finished food contact article meeting the extractive limitations under the intended conditions of use, as shown in paragraph (d) of the Regulation.

The information and certification provided herein are based on data we believe to be reliable, to the best of our knowledge. 

The information and certification apply only to the specific material designated herein as sold by Greencoat and do not apply to use in any process or in combination with any other material. 

They are provided at the request  of and without charge to our customers. 

Accordingly, Greencoat cannot guarantee or warrant such certifications or information and assumes no liability for their use. 

 Additional information: The products themselves have not been tested, but their classifications calculated according to conventional methods (from the dangerous substances regulations) 

The products have been used in the painting of aquariums housing topical fish as well as ponds housing Koi fish with no effects at all.  

The product has no noxious fumes or odour emission during and after application 

Ecological Information:

Aquatic toxicity:  No known effects 

Biodegradability:   Products are considered highly biodegradable, but not tested. 

Bio-accumulation: No known effects

Mobility: Not tested

Additional information:                

The product is environmentally friendly with a Zero to very low VOC (Volatile Organic Compound) , determined by the choice of colour introduced.

CategoriesSpecialized Coatings by

GREENCOAT MANUFACTURED COATINGS

THE ZERO VOLATILE ORGANIC COMPOUNDS (V.O.C.) ENVIRONMENTAL MAINTENANCE TECHNOLOGY (E.M.T.) range of products is a water-bond range of extremely pliable waterproofing and protective coatings of high density.

  • A rather revolutionary technology combining ancient and modern alchemy resulted in the world’s first technology to deliver highly durable maintenance products free from volatile organic compounds, the dangerous and harmful compounds that are emitted by the uses of paints, waterproofing materials and other maintenance products.  These V.O.C. components hold a serious threat to the environment and inhabitants of the world.
  • GREENCOAT ZERO V.O.C.  E.M.T. was developed over a period of more than 30 years. This most revolutionary research resulted in maintaining products for the lasting protection of literally any surface, especially at a time of environmental concern. It’s most revolutionary characteristics, the ability to meet industrial performance demands, whilst posing no threat to the environment.
  • This product is exclusively made from the world’s finest materials, offer affordable premium quality multi-purpose maintenance coatings, which are application and environmentally safe and user friendly. 
  • The products are designed to provide a highly durable, elastic, and attractive protective coating on practically any surface.
  • Unless otherwise indicated, the products can be applied with brush, roller, or spray.
  • GREENCOAT ZERO V.O.C.  E.M.T. Range of products is non-flammable, totally waterproof, resistant to oil, petrol, wax crayons, ball point markings, ultra violet rays, extreme temperatures of both plus and minus, acids and fungus growth.
  • The products can be applied to old and new galvanised roofs, plaster, brick, stone, cement, asbestos, concrete, fibre, class, water tanks, aluminium, polystyrene, vinyl, cloth, paper, canvas, cardboard, vehicles or virtually any surfaces what you wish to paint.
  • Toxicological Information:
  • Skin contact: No known effects

Eye contact: Splashes can cause eye irritation.

Chromic toxicity:No known effects

Carcinogenicity: No known effects 

Mutagenicity: No known effects 

Neurotoxicity: No known effects 

Reproductive hazards:No known effects

CategoriesWaterproofing by

ROOF AND POND SEALER

Roof & Pond Sealer is a water-based, fire retardant, waterproofing and an elastomeric sealant. This product is ready for application and is used to line electric cables and water pipes. It is also used to fill and seal cracks and joints in both metal and concrete surfaces, which ultimately prevents water penetration.

When the product is cured, it forms a tough, highly durable, flexible seal that has ultimate protection properties and can tolerate thermal, shrinkage movements. A satin finish is available in white, standard colours and tintable pastel base colours. The standard colours that are available are Charcoal, Medium Grey, Light Grey, Modern Red, Modern Brown, Terracotta, Black, Green, and White.

Principal characteristics:

  • The product has fast drying, excellent water resistance properties and excellent movement tolerance.
  • Cures to form an elastic seal and is excellent for sealing cracks and joints.
  • Stain, impact, and fire resistant.

Intended use:

GREENCOAT Roof & Pond Sealer has sealing and adhesive properties. The product can be applied over concrete, metal, wood etc. The ideal area for application is ponds, metal roofs, parapets, dam, gutters, down pipes, concrete roofs, pre-cast panel walls, glazing etc.

Cleaning:

Clean all tools (brushes and rollers) while wet with water after use.

Download Brochure

GREENCOAT ROOF & POND SEALER TDS & MSDS.pdf

Contact us today for more info

CategoriesWaterproofing by

HOW TO DO A WATERPROOFING APPLICATION ON AN ASBESTOS ROOF

GREENCOAT RoofRubber is a modified flexible acrylic emulsion with a slight sheen for waterproofing of roofs, parapets and wall surfaces.

Step 1:

Wash the roof with Greencoat Prep and brush off the Asbestos residue.

Step 2:

Wash the roof with Greencoat Greenwash to neutralise the roof.

Step 3:

Get an Asbestos contractor that is registered with the Government Chief inspectors to remove the asbestos residue.

Step 4:

Prime the roof with Greencoat Bind.

Step 5:

Apply two coats of Greencoat Roofrubber.

For more info Contact Us Today!

CategoriesWaterproofing by

HOW TO WATERPROOF YOUR ROOF WITH ROOFRUBBER.

Correct surface preparation is essential for good product performance and all surfaces should be prepared as per the standard GREENCOAT Preparation Specifications.

Do not apply when ambient temperatures are below 4°C  and above 40°C.

  1. Step 1 –Wash your roof thoroughly with Greencoat Greenwash Cleaner
  2. Step 2 – If you have a Tile/Concrete roof you will then apply our Greencoat Bind Primer. If you have a Corrugated/Galvanised roof you will then apply our Greencoat Metaltreat Primer. You can soak your membrane in the Roofrubber if you have a need to apply membrane where there is open areas.
  3. Step 3 – Apply 2 coats of the Roof Rubber.

Greencoat Roofrubber is available in our standard colours:  Charcoal, Medium Grey, Light Grey, Modern Red, Modern Brown, Black, Green and White.